INTERMEC PM4I PRINT DRIVER

Check the media path. Make sure the serial port configuration settings match that of the host. If the sensitivity setting is correct, try changing the darkness adjustment. Print speed exceeds the capacity of the media. Adjust the knob to achieve the best print quality. If the sensitivity setting is correct, try changing the print darkness.

Uploader: Yozil
Date Added: 19 October 2015
File Size: 13.5 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 63173
Price: Free* [*Free Regsitration Required]

Replace the cable if it is damaged.

Use a higher quality label and ribbon stock. Make sure the print head is down. Corrupt or incorrect information in printer memory.

The label format extends beyond the label om4i. Incorrect darkness control setting. Set the printer to the default configuration using the DIP Switches.

The print head has overheated. Incorrect label rest point setting. Make intermrc the serial port configuration settings match that of the host. The print head is up. Incorrect media sensitivity setting. Dirty print head Dirty media path or rollers Poor quality label or ribbon stock. Clean the print head Clean the media path Use higher quality label and ribbon stock.

  BYTECC SLIM USB EXTERNAL FLOPPY DISK DRIVE DRIVER

Be sure that the ribbon is installed with the shiny side facing the print head. Change inteermec sensitivity setting to match the media type. The media is loaded incorrectly.

Set the media switch for the type of media being used. Print speed exceeds the capacity of the media.

Intermec – Problems, Causes and Solutions

Incorrect label stock setting. Uneven print contrast density.

If the sensitivity setting is correct, try changing the darkness adjustment. Change the image bands or print speed setting. Media is sticking to the paper path. Clean the self-strip roller.

Barcodes,Inc.

Serial port is incorrectly configured. Print head, platen roller or label path are dirty. You have incorrectly set the image bands or print speed.

Change sensitivity setting to match the media being used. Remove media from under the label sensor. The self-strip roller is dirty.

Intermec EasyCoder PM4i Print head

Adjust the darkness control. Lower print speed or use media inteemec for the print speed being used. Check the connections at both ends and the pins and replace cable, if necessary.

  BLADE3D MVP4 VIDEO DRIVER DOWNLOAD

Reset the memory to return the printer to its default configuration.